| |
Harris TCF 60 21.000 inch
cutoff full combination folder
Harris TCF60 22.750 inch cutoff full combination folder
One rebuilt Harris HCR4 chill roll assembly.
Four to eight units of ERSA remanufactured and enhanced in (2004)
M1000A1 22.750 print units with Perretta ink fountain, Baldwin Spray
dampening, blanket washers, ER Smith quick lock ups and a rated speed in
excess of 1400SFPM. These units would be great for a swap out!
Eight units of NCH400 ready for remanufacture or enhanced to the
NC400B performance level
Harris M1000BE
HARRIS M1000BE (22 Ύ X 38)
CSO # 022389
SHIPPED MARCH 31, 1990
The M1000BE, 22.750 (578 mm) x 38 (965 mm) consists of eight (8)
perfecting printing units for two web operation
Press # 22
started
live production on 7-25-1990
Butler model 7000 Splicers, 738MD J5666 -2LH, J5666 1RH for two web
operation
1:2 plate to blanket cylinder arrangement
Duo Trol Dampening for alcohol free operation
Harris T-23U Infeeds with variable speed drive, harmonic drive, console
tension displays, WPC web guides.
Quick plate lockup
Unit to Unit phasing
Plate cylinder cocking
Form roll following
4 water-cooled vibrators
Form roll following
24 zone ink fountains, which will accommodate 2.86 gallons of ink
Worm & wheel drive
4:1 drive ratio
Telecolor ll
Tec Phazer 390 dryers (32) for two web operation
18594-2P350-40
Two M1000BE 4 roll chill stands
Baldwin automatic blanket cleaners
Note: not being used
Air bustle wheels
Chill roll clutch
WPC cut off controls
Two chill jets / Chill roll Pac
Dampening solution mixing system, model 841-400
Oxy Dry Ink levelers
Mode 3A drive / Horsepower two 250 hp motors / modem diagnostics
WPC silicone applicator
Tec turns between 4 & 5
Low pressure air blower / Lamson blower
WPC CCR register control
Graphics Microsystems Closed Loop Color system with GMI consoles
Harris PFF-1 # 022389-13 two former folder for two web operation
022389-13
Baldwin stackers
4 stak-o-veyors
Harris TCF-60 combination folder #35C-A-006TCF60
MC-A0122-150
Log stacker for the combo folder with Dynaric 117 strapper
Prefolder above TCF-60 folder
6 angle bars
Note: Unit # 7 lower & upper blanket has been patched
needs some cams
on ductors
Total hours 893476 / Elapsed time 2404732
HARRIS M1000BE SPECIFICATIONS
Plate cylinder circumference
22.750
Blanket cylinder circumference
45.50
Maximum web width
38
Maximum speed (63,300 IPH)
2000 FPM
Actual blanket cylinder gap
.180
Blanket cylinder non-print gap
.280
Actual plate cylinder gap
.182
Plate cylinder undercut
.015
Blanket cylinder undercut
.071
Bearer width
2.00
Lateral register
plus minus .125
Circumferential register
plus minus .125
Unit to unit register
plus minus .125
Plate cylinder cocking with form roll following
plus minus .010
Ink fountain capacity
2.86 US gal.
Harris M1000BE
HARRIS M1000BE (22 Ύ X 38)
CSO # 022489
SHIPPED APRIL 30, 1990
The M1000BE, 22.750 (578 mm) x 38 (965 mm) consists of eight (8)
perfecting printing units for two web operation
Press # 23
Started
live production on 8-8-90
Butler model 7000 Splicers, 738 MD J56667-2LH / J5667-1RH for two web
operation
1:2 plate to blanket cylinder arrangement
Duo Trol Dampening for alcohol free operation
Harris T-23U Infeed with variable speed drive, harmonic drive, console
tension displays, WPC Microtrak web guides.
Quick plate lockup
Unit to Unit phasing
Plate cylinder cocking
Form roll following
4 water cooled vibrators
Form roll following
24 zone ink fountains which will accommodate 2.86 gallons of ink
Worm & wheel drive
4:1 drive ratio
Telecolor ll
Tec Phazer 390 dryers (32) for two web operation
16604.. 2P-305-40
Two M1000BE 4 roll chill stands
022489-10
Baldwin automatic blanket cleaners
Note: ABCs not being used
Air bustle wheels
Chill roll clutch
WPC cut off controls
Two Chill jets / Chill Roll Pac
Dampening solution mixing system
Model 841-400
Oxy Dry Ink levelers
Mode 3A drive
Horsepower 2 -200 hp motors
Modem diagnostics
WPC silicone applicator
Tec turns between 4 & 5
Low pressure air blower
WPC CCR microtrak register control
Lamson blower
Graphics Microsystems Closed Loop Color system with GMI consoles
Harris PFF-1 two former folder for two web operation
022489-10
Baldwin stackers
4 stak-o-veyors
Total count 2378383
Elapse time indicator broken
Note: Upper plate cylinder in unit # 2 has been patched
HARRIS M1000BE SPECIFICATIONS
Plate cylinder circumference
22.750
Blanket cylinder circumference
45.50
Maximum web width
38
Maximum speed (63,300 IPH)
2000 FPM
Actual blanket cylinder gap
.180
Blanket cylinder non-print gap
.280
Actual plate cylinder gap
.182
Plate cylinder undercut
.015
Blanket cylinder undercut
.071
Bearer width
2.00
Lateral register
plus minus .125
Circumferential register
plus minus .125
Unit to unit register
plus minus .125
Plate cylinder cocking with form roll following
plus minus .010
Ink fountain capacity
2.86 US gal.
Insert Equipment
Two units of N946 21 inch repeat
Two units of N954 21 inch repeat
Harris N900, N954 parts, gears, hangers, vibrators.
N954 cylinder swap out program
N900 cylinder swap out program
One Harris RBC 21 inch folder swap out program
One Scheffler ribbon shifter multiple webs
Goss C700 print register enhancements
Goss C700 parts, gears, vibrators, hangers etc
One Harris Chill roll assy. 46 inch press
One N900-21 inch Infeed
One Meg DME splicer for 46 inch press
Half web equipment
One Ryco ½ web silicone applicator.
One Greg ½ web perforator.
Six Harris M110A units.
One Harris M110A folder
One Harris M110B folder
One Harris M110 four-roll chill roll assy.
One Harris M110 three-roll chill roll assy.
One M110 manual plate bender
Full web presses
Six Harris M200 23 9/16 with Duotrol dampening
One Hantscho 38 22.776 infeed
One Harris 38 two web T23U infeed
Two Hantscho Mark V units 17 Ύ
Five M1000A units 22.750
Two Harris M1000 units 630mm
22Ύ M1000A and M1000B quick lockup cylinders
22Ύ M1000A and M1000B cylinder swap program.
M1000B 6-Unit complete press built in 1998; condition-very good, 22.750,
one web with a TCF 70 combination folder or PFF1 folder
Harris M1000B parts, gears vibrators, vibrator gudgeons, cylinders.
Miscellaneous equipment
One M1000 thru M1000BE manual plate bender (great for backup for
automatic benders)
Harris 1991 TCF-70 Folder 22.750 full combination folder with very low
operating hours.
One Harris 22-3/4 PFF1 folder with very operating low hours
One Harris rebuilt QC4 Folder 22.750
One Blava 22.750 sheeter
Four WPC web guides 38
One Baldwin Stacker
Martin Half web splicer
Three Horizontal WPC Silicone Applicator
Two 150 horsepower DC motors with blowers (for Spare spares)
Two 100 horse power DC motors (for Spares) |
